Himalayan Salt Wall Panels With or Without Lights

• Made from 100% Authentic Himalayan Salt Block

• Panels measure 16"W x 18"H x 1.75" Thickness.
• 6 bricks per panel

Routine Cleaning

• Use a clean, dry microfiber cloth to gently remove dust and debris.
• Use a soft-bristle brush to clean dust from crevices.
• Low-pressure compressed air may be used to remove dust from difficult-to-reach areas.
• Always wipe gently to avoid scratching the salt surface.
• Remove dust and debris using light pressure.
• Immediately remove any visible moisture from the salt surface.

Do Not Use

• Do not saturate the salt with water.
• Do not use wet cloths or sponges.
• Do not use steam cleaners or pressure washers.
• Do not spray cleaning products directly onto the salt.
• Do not use abrasive cleaners.
• Do not use bleach, ammonia, solvents, or disinfectants.
• Do not use acidic or alkaline cleaning chemicals.
• Do not apply sealers, waxes, or coatings.
• Do not pour water directly onto the salt.

Humidity & Environmental Conditions

• Maintain relative humidity below 60% whenever possible.
• Recommended ambient temperature: 60–90°F (16–32°C).
• Maintain adequate ventilation and airflow, particularly in spas, wellness areas, bathrooms, salt therapy rooms, and saunas.
• Avoid prolonged exposure to high humidity.
• Prevent standing water from accumulating near the installation.

If Condensation or Moisture Occurs

• Increase ventilation and airflow.
• Allow the salt to dry naturally.
• Wipe away excess moisture with a clean, dry cloth.
• Address moisture issues promptly.

Excessive or prolonged moisture can cause:

• Surface moisture
• Salt crystallization
• Softening of salt edges
• Accelerated wear or surface erosion

LED Lighting Maintenance

For installations with integrated LED lighting:

• Inspect the lighting system every 6–12 months.
• Verify that the LED lighting is operating properly.
• Inspect wiring connections.
• Confirm that power supplies remain dry and unobstructed.
• Disconnect power before performing any electrical maintenance.
• Electrical service and repairs should only be performed by qualified personnel.

Protect the Salt Wall

• Do not strike the salt with hard objects.
• Do not lean ladders, tools, or equipment against the salt wall.
• Keep the installation clean and dry.
• Maintain stable indoor environmental conditions.
• Conduct a visual inspection at least annually.

Natural Characteristics

Himalayan salt is a natural mineral, so variations are normal. Over time, you may notice:

• Minor color variations
• Natural mineral veining
• Crystal development
• Changes in surface texture
• Small chips or natural mineral inclusions becoming more visible

These are natural characteristics of Himalayan salt and are not necessarily defects.

Long-Term Care

For maximum longevity:

Keep the salt wall clean and dry.

Maintain stable temperature and humidity conditions.

Provide adequate ventilation.

Address moisture or condensation promptly.

Avoid harsh chemicals and excessive moisture.

Perform regular visual inspections.

Protect the salt panels from impacts and physical damage.